Würth UAE Contact +971 50 858 2034 | Free delivery on orders above 200 AED

Ceiling nail W-DN

Ceiling nail W-DN
ANC-(W-DN)-(A2K)-4,5-6X40

Art.-no. 09053645
EAN 4011231850407
Prices for customers after login

Exclusively for trade customers

Register now and access more than 125,000 products

Easy mounting: Plug it in, drive it flush, and done! For the mounting of ceiling suspensions or C-profiles in dry walling. For concrete, zinc-plated steel
  • Push-through installation

  • Small drill hole depth

  • Small drill hole diameter

  • Immediate load-bearing capacity — no waiting

  • Easy insertion: Knock in protruding pin with hammer until flush

  • No special drills or setting tools required

  • Anchorage via friction locking — distance-controlled expanding anchor
Proof of Performance

Anchors in a non-structural system based on a redundant design in concrete: European Technical Approval ETA-12/0029


  • Dimensioned in accordance with the European Technical Approval Guidelines (ETAG) for "Metal Anchors for Use in Concrete", Appendix C, design method C

  • Anchorage with European Technical Approval in cracked concrete (concrete tensile zone) and non-cracked concrete (concrete compression zone)

  • The anchor has European Technical Approval for use in reinforced or unreinforced normal weight concrete with a strength class of min. C20/25 and max. C50/60 in accordance with EN 206-1:2000-12


Fire resistance: R30, R60, R90, R120 (base material: concrete C20/25 to C50/60): Technical Report TR 020 "Evaluation of anchorages in concrete concerning resistance to fire" (included in ETA-12/0029)

Notice

Anchors in a non-structural system based on a redundant design in concrete (for all load directions)


The partial safety factors of the resistances regulated in the approval and a partial safety factor of the effects of YF = 1.4 have been taken into account. Please refer to the European Technical Approval Guidelines (ETAG), Appendix C, for information on combining tensile and transverse loads, influence of the edge distance and groups of anchors.



Permissible load when exposed to fire


The partial safety factors for load-bearing capacity on exposure to fire of YM,fi = 1.0 as recommended in the approval and the partial safety factor of the effects of YF = 1.0 have been taken into account.



Nominal drill diameter and diameter of cutting edges of the drill


Tungsten carbide hammer drill bits must comply with the specifications set out in the information leaflet of the Deutsches Institut für Bautechnik (German Institute of Civil Engineering - DIBt) and the Association of German Tool Manufacturers (FWI) on the "characteristic values, requirements and tests for masonry drill bits with tungsten carbide cutting body which are used for the manufacture of drilled holes for anchoring". Würth hammer drill bits meet the specifications set out in the information leaflet.

Application area
Suspended ceilings
Create the drill hole
Clean the drill hole
Insert anchor through component
Knock in pin until flush

Anchors in a non-structural system based on a redundant design in concrete: European Technical Approval ETA-12/0029


  • Dimensioned in accordance with the European Technical Approval Guidelines (ETAG) for "Metal Anchors for Use in Concrete", Appendix C, design method C

  • Anchorage with European Technical Approval in cracked concrete (concrete tensile zone) and non-cracked concrete (concrete compression zone)

  • The anchor has European Technical Approval for use in reinforced or unreinforced normal weight concrete with a strength class of min. C20/25 and max. C50/60 in accordance with EN 206-1:2000-12


Fire resistance: R30, R60, R90, R120 (base material: concrete C20/25 to C50/60): Technical Report TR 020 "Evaluation of anchorages in concrete concerning resistance to fire" (included in ETA-12/0029)

Product information

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

 | 

 | 

Application area
  • Suitable for attaching lightweight ceiling cladding and suspended ceilings, metal profiles, perforated strips, wire hangers, vernier hangers, wooden strips, wooden laths, square timbers, etc.

  • May only be used in dry indoor room conditions

Type description

W-DN

Material

Steel

Surface

Zinc plated

Anchor diameter

6 mm

Max. attachment height (t fix)

5 mm

Effective anchoring depth (h ef)

32 mm

Nominal drill-bit diameter (d 0)

6 mm

Drill hole depth (h 0)

40 mm

Through-hole in the component to be connected (d f)

7 mm

Drill cutting diameter (d cut)

6.4 mm

Minimum component thickness (h min)

80 mm

Performance data
Anchor diameter [mm]6
Anchors in a non-structural system based on a redundant design in concrete (for all load directions)Fzul [kN] ≥ C20/25 und ≤ C50/60 1)2.41)
Permissible bending momentMzul [Nm]3,1
Adm. load under exposure to fire (Technical Report TR 020) for spacing and edge distances, see European Technical Assessment ETA-06/0259R30; Fzul [kN]2)0,8
R60; Fzul [kN]2)0,7
R90; Fzul [kN]2)0,6
R120; Fzul [kN]2)0,4
Characteristic values
Axis spacingscr [mm]200
Edge distanceccr [mm]150
Minimum member thicknesshmin [mm]80
Effective anchorage depthhef [mm]32
Nominal drill ∅ 3)d0 [mm]6
Cutting edge ∅ 3)dcut ≤ [mm]6,4
Drill hole depthh0 ≥ [mm]40
Through hole in the component being connecteddf ≤ [mm]7

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information