A/C leak detection additive - LKDETRADD-A/C-7,5ML

A/C leak detection additive - LKDETRADD-A/C-7,5ML - 1

A/C leak detection additive - LKDETRADD-A/C-7,5ML - 2

A/C leak detection additive - LKDETRADD-A/C-7,5ML - 3

A/C leak detection additive

Name: A/C leak detection additive
Brand: Würth
SKU: 0892764010

Air-conditioning leak detection dye cartridge
LKDETRADD-A/C-7,5ML

Art.-no. 0892764010

EAN 4099618610820

All versions

Similar products

Prices for customers after login

A/C leak detection additive

Art.-no. 0892764010

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: +971 50 8582034

Fluorescent additive for locating leaks in R134a climate systems without climate service device.

Air-conditioning service unit not required to perform a service

Portable

Notice

Adapter art. no. 0764000114 can only be used with a 134a coupling.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For reliable localisation of leaks and micro-leaks in R134a air-conditioning systems. Can be used in air-conditioning systems with electric compressors (hybrid, start/stop, electric vehicles).

Instructions

Screw the filling adapter, art. no. 0764000114, to A/C leak detection additive, art. no. 0892764010.

Then insert the filling adapter into the application gun, art. no. 0891764010.

Inject the entire contents of the cartridge into the air-conditioning circuit via the low-pressure side.

Contents	7.5 ml
Weight of content	7.27 g
Chemical basis	Synthetic oil
Colour	Yellow
Smell/fragrance	Aromatic
Density	0.97 g/cm³
Shelf life from production	48 Month
Min. flashing point	88 °C

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 5

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.