AMO^®-Y window frame screw dia. 7.5 mm

AMO-Y 7.5 steel zinc flake, silver, RW 30
SCR-(AMO-Y)-RW30-(DPS)-7,5X152
AMO III

Art.-no. 0234630152

EAN 4049557909028

All versions

Similar products

Prices for customers after login

AMO^®-Y window frame screw dia. 7.5 mm

Art.-no. 0234630152

Prices for customers after login

Quantity

PU

x 200 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Login/Register
Call customer service: +971 50 8582034

Specification

Spacing assembly screw ideal for window and door mounting in aerated concrete, concrete as well as solid and perforated bricks. Optimised thread geometry and special coating

With special coating and optimised thread geometry

Tension-free spaced mounting with all frame materials for anchoring in aerated concrete, concrete as well as solid and perforated bricks

Tested burglary-resistant properties in resistance class RC3

Burglary-resistant assembly in resistance classes RC2 and RC3

Short installation times, as no setting tools are required

Positive-locking, removable anchorage with no expansion pressure

Proof of Performance

Approval:

DIBt National technical approval for anchoring window frames in concrete and masonry Z-21.1-2097

Test reports:

Test report 211 43728. Proof of burglary-resistant properties resistance class RC3. Plastic windows in autoclaved aerated concrete masonry PP2-0.35.

Test report no. 105 42538/1. Attachment of a plastic window in autoclaved aerated concrete masonry PP2-0.35. Test performed without lateral spacer blocks.

Notice

It is important to check that the components are correctly installed for the specific construction conditions (e.g. weight of window casement, surface properties, hole pattern in the brick). Note the guidelines for planning and executing the installation of windows and house doors (art. no. 5995 000 000). To ensure the fall-proof mounting of windows in line with applicable guidelines and regulations, approved securing systems (e.g. window installation rail W-ABZ) must be used, or approval is required for each individual case.

Application area

Instructions

Align and affix the window frame

Screw in the screw

Press on cover cap

Create the drill hole

Clean the drill hole

Align and affix the window frame

Screw in the screw

Press on cover cap

Approval:

DIBt National technical approval for anchoring window frames in concrete and masonry Z-21.1-2097

Test reports:

Test report 211 43728. Proof of burglary-resistant properties resistance class RC3. Plastic windows in autoclaved aerated concrete masonry PP2-0.35.

Test report no. 105 42538/1. Attachment of a plastic window in autoclaved aerated concrete masonry PP2-0.35. Test performed without lateral spacer blocks.

Application

Application area

Fast and tension-free spaced mounting of window and door frames

In aerated concrete, concrete, solid and perforated bricks

Easy installation in aerated concrete: The AMO-Y-screw is screwed without pre-drilling the aerated concrete

Technical information


Length (l)	152 mm
Thread diameter (d)	7.5 mm
Material	Steel
Surface	Flake zinc silver
Head type	Socket head
Head diameter (d(h/k))	8 mm
Internal drive	RW30
Drill-hole diameter in window frame (dWin)	6.2 mm
Thread type	Dowel screw thread
Shape of tip	Tip

Performance data according to general construction permit For further anchoring bases, raw densities, minimum compressive strengths, free screw lengths etc., please see permit Z-21.1-2097
Raw density class [kg/dm³]	Minimum compressive strength [N/mm²]	Minimum screw depth h}_^nom ≥ [mm]	Min. Edge distance c_min ≥ [mm]	Fzul [kN]¹) for individual anchors under shear load, free screw length ef = 20mm²)
Standard concrete DIN EN 206-1:2001-07
C20/25–C30/37	25	30	40	0,33
Solid brick Mz ≥ 3DF (≥ 240x175x113) DIN 105-100: 2012-01; EN 771-1:2015-11 e.g. Wienerberger GmbH
1,8	≥20	50	50	0,33
1,8	≥10	50	50	0,27
Solid sand-lime brick Silka XL Basic, Silka XL Plus (≥ 248x175x498) DIN V 106:2005-10; DIN EN 771-2:2011; Z-17.1-997, Xella Deutschland GmbH
2,0	≥36	50	40	0,33
2,0	≥28	50	40	0,33
2,0	≥20	50	40	0,33
Vertically perforated brick HLzB, flat vertically perforated brick PHLzB, PHLzE, 12DF (372x240x238) DIN EN 771-1 in conjunction with DIN 20000-401:2017-01 e.g. Wienerberger GmbH
1,05	≥8	60	65	0,27
1,05	≥6	60	65	0,20
Hollow sand-lime brick KS L, 8DF ≥ 8DF (≥ 248x240x238) DIN V 106:2005-10; DIN EN 771-2:2015-11, e.g. Xella Deutschland GmbH
1,2	≥12	50	45	0,33
1,2	≥10	50	45	0,33
1,2	≥8	50	45	0,33
1,2	≥6	50	45	0,23
Hollow sand-lime brick KS L, 6DF ≥ 6DF (≥ 248x175x248) DIN V 106:2005-10; DIN EN 771-2:2015-11, e.g. Heidelberger Kalksandstein GmbH
1,6	≥12	50	90	0,33
1,6	≥10	50	90	0,33
1,6	≥8	50	90	0,33
Hollow sand-lime brick KS L, 6DF ≥ 6DF (≥ 248x175x248) DIN V 106:2005-10; DIN EN 771-2:2015-11, e.g. Heidelberger Kalksandstein GmbH
1,6	≥12	50	35	0,27
1,6	≥10	50	35	0,20
1,6	≥8	50	35	0,17
Aerated concrete AAC (≥ 499x240x250) DIN EN 771-4:2015-11
0,35	≥2	140	100	0,33
0,35	≥4	140	100	0,33
1) A partial safety value of _YF = 1.5 was taken into account for wind 2) Values for deviating free screw lengths/joint widths can be found in permit Z-21.1-2097

General installation parameters
Nom. drill ∅	Standard concrete	d0 [mm] =	6,5
	Solid brick Mz		6,0
	Solid sand-lime brick		6,0
	Vertically perforated brick, flat vertically perforated brick		6,0
	Aerated concrete		Without predrilling
	Hollow sand-lime brick		6,0
Drilling surface diameter	Standard concrete	dcut ≤ [mm]	7,0
	Solid brick Mz		6,4
	Solid sand-lime brick		6,4
	Vertically perforated brick, flat vertically perforated brick		6,4
	Aerated concrete		Without predrilling
	Hollow sand-lime brick		6,4
Drill hole depth	Standard concrete	h1 ≥ mm	Screw depth + 10 mm + non-bearing layer/plaster
	Solid brick Mz
	Solid sand-lime brick
	Vertically perforated brick, flat vertically perforated brick
	Aerated concrete
	Hollow sand-lime brick
Screw-in depth	Standard concrete	hnom ≥ [mm]	30
	Solid brick Mz		50
	Solid sand-lime brick		50
	Vertically perforated brick, flat vertically perforated brick		60
	Aerated concrete		140
	Hollow sand-lime brick		50
Nom. drill ∅ in window frame	Standard concrete	dFenst = [mm]	6,2
	Solid brick Mz		6,2
	Solid sand-lime brick		6,2
	Vertically perforated brick, flat vertically perforated brick		6,2
	Aerated concrete		6,2
	Hollow sand-lime brick		6,2
Drilling processes	Standard concrete	-	Hammer drilling
	Solid brick Mz		Hammer drilling
	Solid sand-lime brick		Hammer drilling
	Vertically perforated brick, flat vertically perforated brick		Rotary drilling
	Aerated concrete		Without predrilling
	Hollow sand-lime brick		Rotary drilling
Minimum edge spacing	Standard concrete	cmin ≥ [mm]	40
	Solid brick Mz		50
	Solid sand-lime brick		40
	Vertically perforated brick, flat vertically perforated brick		65
	Aerated concrete		100
	Hollow sand-lime brick		See performance data

Documents/CAD data

Product information

Datasheets (1)

CAD data (available after login)

Certificates/ Documents (0)

Last viewed

Hexagon Socket Head Cap Screw

Hexagon Socket Head Cap Screw

Plastic frame anchor W-IFRC 8 steel zinc plated

Plastic frame anchor W-IFRC 8 steel zinc plated

Light metal hammer

Light metal hammer

3/8-inch socket wrench insert, metric long

3/8-inch socket wrench insert, metric long

3/8-inch socket wrench insert, metric long

3/8-inch socket wrench insert, metric long

3/8-inch socket wrench insert, metric long

3/8-inch socket wrench insert, metric long

3/8-inch socket wrench insert, metric long

3/8-inch socket wrench insert, metric long

3/8-inch socket wrench insert, metric long

3/8-inch socket wrench insert, metric long

3/8-inch socket wrench insert, metric long

3/8-inch socket wrench insert, metric long

3/8-inch socket wrench insert, metric long

3/8-inch socket wrench insert, metric long

Hide details Show details Disclaimer Legal Notice Cookies