Ankle-cut safety shoes S1P ECONOMY
Safety boots S1P ECONOMY
SAFEBOOT-S1P-(SERIES ECONOMY)-BLACK-SZ43
Register now and access more than 125,000 products
Conforms to EN ISO 20345:2022 S1P
High Comfort
- Breathable upper made of embossed buffalo split leather
- Leather thickness: 1.4-1.6mm
- Oxford collar with sandwich lining
- Weigh approx. 1300g/pair for size 42
High Security
- Steel toe cap protects against impact of 200 Joule
- Steel midsole offers perforation resistance
- Slip resistance, oil resistance dual-density PU/PU outsole
- Anti-slip
- Antistatic
- Energy absorption at seat region
Datasheets(X)
After use, the shoes should be cleaned from dirt.
- For the care of leather shoes, normal shoe polish is only suitable to a limited extent.
- In the event of footwear made of textile materials, please remove stains with a clean cloth, pH-neutral soap and warm water. Never remove the dirt with a brush, this can damage the shoes material.
- If the shoes got wet during daily work, put them in an airy place and let them dry slowly. Never put the shoes on a heater or other heat source to dry them quickly. Otherwise, the leather will get hard and brittle.
- It is very good to have two pairs of shoes and wear them alternately, to let them dry enough time.
Colour | Black |
Size | 43 |
Material of shoes upper | Buffalo split leather |
Safety category | S1P |
Standards | ISO 20345 |
ISO | 20345 |
Last viewed
Flat washer For hexagon head bolts and nuts
Twist drill bit HSCo8 WN TYPE RH
Nylon anchor For light loads (secondary attachments)
Combination pliers DIN ISO 5746
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Wire end ferrule without plastic sleeve DIN 46228 Part 1
STARLINE® Plus trousers
Plumb bob
3/4-inch impact socket wrench insert hexagon, metric, long
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain