Blind rivet, open, with break mandrel and countersunk head ISO 15978, countersunk head, aluminium/steel
ISO 15978 aluminium/steel zinc ptd. counters. head
RIV-ISO15978-L-ALU/ST-(5,0-6,5)-4,0X10
Register now and access more than 125,000 products
Sleeve: Plain aluminium; pin: Zinc-plated steel, blue passivated
The dimensions and tolerances defined in EN ISO 15978 must be observed.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 4 mm |
Length (l1) | 10 mm |
Head diameter (dk) | 8.4 mm |
Head height (k1) | 1.7 mm |
Material of sleeve | Aluminium |
Material of mandrel | Steel |
Surface of the sleeve | Plain |
Surface of the mandrel | Zinc plated |
Min./max. grip range | 5.0-6.5 mm |
Drill hole diameter | 4.1 mm |
Shear-fracture load | 850 N |
Tensile fracture load | 1200 N |
Nominal diameter x length (Ø d x l) | 4 x 10 mm |
Head type | Countersunk head 120 degree |
Head angle | 120 Degree |
Last viewed
Ratchet screwdriver, pneumatic, spr prts
100% Cotton Coverall 280 gsm
Battery/charging system tester with thermal printer
Hexalobular-type cheese head screw, low head
Hexalobular-type cheese head screw, low head
Cone grease nipple, inch, shape C, angled shape 90° DIN 71412 shape C, zinc-plated steel, inch
Transmission jacks
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagon nut with clamping piece (non-metal insert) ISO 7040, A2-70 stainless steel, plain
Ratchet combination wrench Multi-profile for five screw head drives