Blind rivet, open, with break mandrel and flat head ISO 15981, dome head, aluminium/aluminium
ISO 15981 flat head aluminium/aluminium
RIV-ISO15981-ALU/ALU-(6,0-8,0)-4,8X12,0
Register now and access more than 125,000 products
- Standardised "ISO product" with standardised test criteria (see DIN EN ISO 14589)
- Sleeve: Plain aluminium
- Mandrel: Plain aluminium
The dimensions and tolerances defined in EN ISO 15981 must be observed.
Datasheets(X)
 | |
Nominal diameter x length (d1 x l1) | 4.8 x 12 mm |
Min./max. grip range | 6.0-8.0 mm |
Head diameter (dk) | 10.1 mm |
Head height (k1) | 2 mm |
Min./max. drill hole diameter | 4.9-5.0 mm |
Shear-fracture load | 1160 N |
Tensile fracture load | 1420 N |
Material of sleeve | Aluminium |
Material of mandrel | Aluminium |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Drill hole diameter | 4.9 mm |
Standards | ISO 15981 |
RoHS-compliant | Yes |
Head type | Dome head |
Mandrel diameter (dm) | 3.05 mm |
Last viewed
HSSCo8 bi-metal long-life & speed cylinder saws assortment
Particle board screw, Phillips countersunk head, partial thread
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Washer with large outside diameter DIN 9021, brass, plain
Rivet nut with flat head and knurled shank
Wheel rim cleaner PURPLE
Impact tool Pin punches with pilots in accordance with DIN 6450
Parallel pin, unhardened ISO 2338 steel plain (m6)
Blind rivet, open, with break mandrel and countersunk head ISO 15978, countersunk head, aluminium/steel
Magnetic core drill MKB 35