Brush belt, fine
Fine brush belt
BRSHBL-FN-PGP-DBS3500-L11MM
Register now and access more than 125,000 products
Not for Al or die-cast aluminium. No sand blast effect.
Safety instructions for use with DBS 3500 pneumatic device:
- 11 mm belts may only be operated at a maximum of 5.2 bar
- 23 mm belts may only be operated at a maximum of 6.2 bar
- In both cases, contact pressure may be up to a maximum of 500 gr
The narrow brush belt is specifically designed for the removal of paint from contours and sharp-edged areas with an angle of 90°.
Width | 11 mm |
Würth Catalogue (1)
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Silicone acetate Sanitary purpose
Synthetic corundum flap wheels
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Battery-powered angle grinder EWS 18-A, 125 mm disc
Heavy Duty non-slip floor marking adhesive tape
Bevelled-edge chisel assortment 6 pieces
3/4-inch ratchet With 2-component handle
Wood twist drill bit Cylindrical shank DIN 338
1/4 inch ratchet With turntable switching
