Chair and box angle bracket
Chair and box angle steel zinc plated
CHR/CABBRKT-(A2K)-90/90MM
Register now and access more than 125,000 products
- Holes countersunk and offset on either side for optimised mounting
- For arm lengths up to 75 mm: 2 bore holes
- For arm lengths from 90 mm: 3 bore holes
- Sheet steel galvanised on both sides (St37 + A2K)
- Application in utilisation classes 1 and 2 in line with EN 1995:2013
Datasheets(X)
Non load-bearing connection of lightweight wooden structures such as boxes, packaging, furniture, chairs or securing battens without structural attachment.
ASSY 4 and ASSYplus countersunk head screws are suitable fasteners in line with ETA 11/0190
 | |
Limb length x limb length 2 | 90 x 90 mm |
Width of side | 20 mm |
Thickness | 2 mm |
Number of holes in subcarrier nJ + main carrier nH | 3 + 3 PCS |
Diameter of hole | 4.9 mm |
Material | Steel |
Surface | Zinc plated |
Weight | 48 g |
Last viewed
Hexagonal bolt with thread up to the head DIN 933, A2 stainless steel, plain
65/35% Polyester / Cotton Coverall 155gsm
Dual cartridge gun for 585 ml 3:1
Nylon Sanding Fleece Roller
Snipe nose pliers DIN ISO 5745
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Flat washer For hexagon head bolts and nuts DIN 125, A2 stainless steel
Open-end plug tool wrench
Hexagon head sealing plug, short screw-in pin DIN 7604, steel, zinc-plated, blue passivated (A2K)
Hexagonal bolt, with thread to head and fine thread DIN 961, steel, strength class 10.9, zinc-nickel-plated, transparent passivated (P3E)