Collated nails and gas cartridge NG CS-1 For DIGA CS-1
Collated nails and gas cartridge NG CS-1
NL-(DIGA CS1)-FUELCELL-PULSA1000-25MM
Register now and access more than 125,000 products
One packing unit includes 1000 nails and one fuel cell
IBMP MPA TU Braunschweig (Germany)
Expert opinion on fire behaviour of light partition walls made from gypsum plasterboard in accordance with DIN 4102-4: 1994-03
All nails are suitable for secondary attachments (without general construction permit). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or tightening tests.
Datasheets(X)
- For fastening U-profiles in dry walling
- Fastenings on concrete, steel, masonry and wood in electrical and installation work, dry walling etc.
Material of nail | Steel |
Surface | Zinc plated yellow |
Length of nail | 25 mm |
Diameter of nail | 2.6 mm |
Head diameter | 6.3 mm |
Number of nails | 1000 PCS |
Contents | 80 ml |
Container | Cartridge |
Last viewed
Chipping hammer MH 10-SE
Metric double box-end wrench Hexagon with POWERDRIV®
Carbide scriber
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
Support plate
Pneumatic impact screwdriver DSS 1/2 inch H
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Vehicle cable FLRY
Fuse holder For flat blade fuses
Drilling screw, hexagon head with long drill tip and sealing washer pias®