Diamond cutting disc, long-life, construction materials, abrasive For wet cutting

Name: Diamond cutting disc, long-life, construction materials, abrasive For wet cutting
Brand: Würth
SKU: 0666790625

Diamond cutting disc L construction segmented
CUTDISC-DIA-LL-WET-CNSTMAT-B60/55-625
ZEBRA

Art.-no. 0666790625

EAN 4045727114827

All versions

Specification

For wet cutting.

Universal mounting system with 4 driving holes

Notice

Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient peripheral surface speeds

If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts

Work without applying pressure – the weight of the machine is sufficient. Increased pressure causes increased wear.

Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs – risk of injury!

Despite the level of safety offered by the tool, always wear safety glasses and clothing while working

Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions

Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)

If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury

Application area

For stationary saws and bench saws

For wet cutting

For concrete, plaster, mortar, soft sand-lime brick, soft clay brick and soft Poroton

Diameter (Ø)	625 mm
Drill hole	60 mm
Reducing-ring internal diameter	55 mm
Segment height	10 mm
Segment thickness	4.5 mm
Number of segments	60 PCS
Segment connection	Soldered
Max. rotation speed	3100 rpm
Max. circumferential speed	100 m/s