Diamond wet-cutting disc, tile For diamond tile cutting machines
Diamond wet cutting disc tile
CUTDISC-DIA-TILES-WETCUT-BR25,4-D250MM
Art.-no.
0668260251
EAN 4049557742144
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
For fast, clean cutting of tiles, marble, ceramic, granite, sandstone, brick and other light building materials
Notice
- Diamond cutting discs become dull at excessively high speeds and wear too rapidly at insufficient circumferential speeds
- If the ease of cutting decreases (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts
- Separate larger workpiece cross-sections in several sections (swing cut)
- Work without pressure — the weight of the machine is sufficient. Increased pressure causes increased wear.
- Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs — risk of injury!
- Although the tool is safe, always wear protective goggles and clothing while working
- Observe the information on the label (max. speed!), the restrictions of use and the safety instructions
- The direction arrow on the disc must match the machine's direction of rotation
- Must not be used for lateral grinding
- Use the appropriate protective hood
- Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)
- If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury
Product information
Datasheets(X)
Diameter (Ø) | 250 mm |
Drill hole | 25.4 mm |
Last viewed
1/2-inch socket wrench insert, TX head For external TX screws, short
Voltage tester Test Plus
Safety knife Martor Secunorm 380 380001.02
Underbody seal cup gun For applying solvent- and water-based gravel guard, undercoating and cavity sealing products
Screwdriver TX long with round shank
Metric combination wrench with POWERDRIV®
Drift punch According to DIN 6458
Cylindrical grooved pin with chamfer DIN 1473, A1 stainless steel, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Protective glove Red, latex grip