HSCo high performance, nitrated die for the manufacture and repair of standard metric ISO threads according to DIN 13 with cordless drill drivers or manually in the die holder in almost all materials, such as steel up to 1400 N/mm2 strength, stainless steel, cast iron and non-ferrous metals (e.g. aluminium, aluminium alloys and magnesium alloys).
Flexible use with cordless drill screwdrivers and on the lathe
The factory-standard dies in the outer diameter of 25x9 mm enable time-saving, true-to-gauge cutting (M3–M10) and repair (M3–M12) of male threads in the 3-jaw chuck in conjunction with the specially developed adapter
Economic manual use
Instead of five tools, only one die holder is required for manually cutting male threads M3–M12
Outstanding performance
Up to three times longer service life thanks to the 5 % cobalt alloy, surface nitration and newly developed tool geometry
Excellent chip removal in cutting direction thanks to the spiral point
Can be used with almost all materials
Newly developed tool geometry with optimised chip angle
High level of process reliability
due to the lapped, nitrated surface and a longer cut
Easy to use
Easier cutting and smaller torque compared to conventional dies
When thread cutting, sufficient coolant and lubricant must be added.
The dies are suitable for manual use with conventional die holders as well as for use with cordless drill screwdrivers and on the lathe (in conjunction with item 0659 990 001).
For manual use, please note the following: The die is placed in the die holder at the height of the middle screw. The screws are tightened with a screwdriver. The die is placed vertically on the workpiece. Can be used on both sides. After two revolutions, the cut can be broken by briefly turning back.
For use in cordless drill screwdrivers or lathes, please observe the operating instructions for the adapter specially developed for this, item 0659999001.
Number of pieces in assortment/set
7 PCS
Material
High-speed steel with 5% cobalt content
Die assortment HSCo multi performance M3-M12 For standard metric ISO thread, 7 pieces including:
1
x
Die For standard metric ISO thread HSCo Multi Performance
THRDIE-HSCO-WN-MULTI-PERFORMANCE-M3
ZEBRA
Description:
3 mm
HSCo high performance, nitrated die for the manufacture and repair of standard metric ISO threads according to DIN 13 with cordless drill screwdrivers or manually in the die holder in almost all materials, such as steel up to 1400 N/mm2 strength, stainless steel, cast iron and non-ferrous metals (e.g. aluminium, aluminium alloys and magnesium alloys).
Quantity:
1
x
1
x
Die For standard metric ISO thread HSCo Multi Performance
THRDIE-HSCO-WN-MULTI-PERFORMANCE-M4
ZEBRA
Description:
4 mm
HSCo high performance, nitrated die for the manufacture and repair of standard metric ISO threads according to DIN 13 with cordless drill screwdrivers or manually in the die holder in almost all materials, such as steel up to 1400 N/mm2 strength, stainless steel, cast iron and non-ferrous metals (e.g. aluminium, aluminium alloys and magnesium alloys).
Quantity:
1
x
1
x
Die For standard metric ISO thread HSCo Multi Performance
THRDIE-HSCO-WN-MULTI-PERFORMANCE-M5
ZEBRA
Description:
5 mm
HSCo high performance, nitrated die for the manufacture and repair of standard metric ISO threads according to DIN 13 with cordless drill screwdrivers or manually in the die holder in almost all materials, such as steel up to 1400 N/mm2 strength, stainless steel, cast iron and non-ferrous metals (e.g. aluminium, aluminium alloys and magnesium alloys).
Quantity:
1
x
1
x
Die For standard metric ISO thread HSCo Multi Performance
THRDIE-HSCO-WN-MULTI-PERFORMANCE-M6
ZEBRA
Description:
6 mm
HSCo high performance, nitrated die for the manufacture and repair of standard metric ISO threads according to DIN 13 with cordless drill screwdrivers or manually in the die holder in almost all materials, such as steel up to 1400 N/mm2 strength, stainless steel, cast iron and non-ferrous metals (e.g. aluminium, aluminium alloys and magnesium alloys).
Quantity:
1
x
1
x
Die For standard metric ISO thread HSCo Multi Performance
THRDIE-HSCO-WN-MULTI-PERFORMANCE-M8
ZEBRA
Description:
8 mm
HSCo high performance, nitrated die for the manufacture and repair of standard metric ISO threads according to DIN 13 with cordless drill screwdrivers or manually in the die holder in almost all materials, such as steel up to 1400 N/mm2 strength, stainless steel, cast iron and non-ferrous metals (e.g. aluminium, aluminium alloys and magnesium alloys).
Quantity:
1
x
1
x
Die For standard metric ISO thread HSCo Multi Performance
THRDIE-HSCO-WN-MULTI-PERFORMANCE-M10
ZEBRA
Description:
10 mm
HSCo high performance, nitrated die for the manufacture and repair of standard metric ISO threads according to DIN 13 with cordless drill screwdrivers or manually in the die holder in almost all materials, such as steel up to 1400 N/mm2 strength, stainless steel, cast iron and non-ferrous metals (e.g. aluminium, aluminium alloys and magnesium alloys).
Quantity:
1
x
1
x
Die For standard metric ISO thread HSCo Multi Performance
THRDIE-HSCO-WN-MULTI-PERFORMANCE-M12
ZEBRA
Description:
12 mm
HSCo high performance, nitrated die for the manufacture and repair of standard metric ISO threads according to DIN 13 with cordless drill screwdrivers or manually in the die holder in almost all materials, such as steel up to 1400 N/mm2 strength, stainless steel, cast iron and non-ferrous metals (e.g. aluminium, aluminium alloys and magnesium alloys).
Quantity:
1
x
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB VVVV = 4 digits for prefix number (please note that the first digit is currently always 0) AAA = 3 digits for dimension part 1 BBB = 3 digits for dimension part 2
Example article number structures: Example 1: Screw with dimensions of 4x10 mm: VVVVAAABBB 00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm: VVVVAAABBB 005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm: VVVVAAABBB 04076
Price per packaging unit (PU): The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL): The price always applies to a quantity ruled through the price key: Price for 1 unit Price for 100 units Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Select RAL-colour code
Article
Selection is required for an order
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!