Die assortment HSS Performance M3–M12 for standard metric ISO threads
Die, HSS WN M-thread assortment 7 pieces
THRDIE-SORT-HSS-WN-STEEL-PERFM-(M3-M12)
Art.-no.
0652536001
EAN 4061975235503
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
7 pieces. HSS high-performance, nitrated die for the manufacture and repair of standard metric ISO threads according to DIN 13 with cordless drill screwdrivers or manually in the die holder in steel up to 900 N/mm² strength, cast iron and non-ferrous metals (e.g. aluminium, aluminium alloys and magnesium alloys)
Flexible use with a cordless drill/driver and lathe
With standard factory dies of 25x9 mm outer diameter, precise cuts (M3-M10) and the repair of male threads (M3-M12) can be efficiently performed in the three-jaw drill chuck, when used in conjunction with the specially developed adapter (Art.-no.:0659999001).
Can be used economically manually
Instead of five tools, only one die holder is required for manually cutting M3–M12 external threads.
Outstanding performance
- Up to twice the service life thanks to surface nitriding and newly developed tool geometry
- Excellent chip removal in the direction of cutting thanks to the starting groove
High-level process safety
thanks to the lap-coated, nitrided surface and the longer cutting edge
Easy to use
- Simpler cutting and lower torque compared to traditional dies
- Less friction compared to traditional dies
- Can be used on both sides due to the double-sided cutting edge
Instructions
- During thread cutting, an adequate amount of cutting fluid must be used.
- The dies with traditional die holders are suitable for manual use, on a lathe, or with a cordless drill/driver (with article 0659 990 001).
- In case of manual use, please consider the following: The die must be placed in the die holder at the height of the central screw. The screws must be tightened with a screwdriver. The die must be positioned vertically on the workpiece. Can be used on both sides. After two turns, the threading can be interrupted with a short reversal.
- When using cordless drills/drivers or lathes, please refer to the operating instructions for the adapter specifically designed for this purpose, 0659999001 article.
Number of pieces in assortment/set | 7 PCS |
Material | HSS |
Product information
Datasheets(X)
Die assortment HSS Performance M3–M12 for standard metric ISO threads including:
1
x
HSS Performance die for standard metric ISO thread
THRDIE-HSS-WN-STEEL-PERFORMANCE-M3
Description:
3 mm; M3
HSS high-performance, nitrated die for the manufacture and repair of standard metric ISO threads according to DIN 13 with cordless drill screwdrivers or manually in the die holder in steel up to 900 N/mm² strength, cast iron and non-ferrous metals (e.g. aluminium, aluminium alloys and magnesium alloys)
Quantity:
1
x
1
x
HSS Performance die for standard metric ISO thread
THRDIE-HSS-WN-STEEL-PERFORMANCE-M4
Description:
4 mm; M4
HSS high-performance, nitrated die for the manufacture and repair of standard metric ISO threads according to DIN 13 with cordless drill screwdrivers or manually in the die holder in steel up to 900 N/mm² strength, cast iron and non-ferrous metals (e.g. aluminium, aluminium alloys and magnesium alloys)
Quantity:
1
x
1
x
HSS Performance die for standard metric ISO thread
THRDIE-HSS-WN-STEEL-PERFORMANCE-M5
Description:
5 mm; M5
HSS high-performance, nitrated die for the manufacture and repair of standard metric ISO threads according to DIN 13 with cordless drill screwdrivers or manually in the die holder in steel up to 900 N/mm² strength, cast iron and non-ferrous metals (e.g. aluminium, aluminium alloys and magnesium alloys)
Quantity:
1
x
1
x
HSS Performance die for standard metric ISO thread
THRDIE-HSS-WN-STEEL-PERFORMANCE-M6
Description:
6 mm; M6
HSS high-performance, nitrated die for the manufacture and repair of standard metric ISO threads according to DIN 13 with cordless drill screwdrivers or manually in the die holder in steel up to 900 N/mm² strength, cast iron and non-ferrous metals (e.g. aluminium, aluminium alloys and magnesium alloys)
Quantity:
1
x
1
x
HSS Performance die for standard metric ISO thread
THRDIE-HSS-WN-STEEL-PERFORMENCE-M8
Description:
8 mm; M8
HSS high-performance, nitrated die for the manufacture and repair of standard metric ISO threads according to DIN 13 with cordless drill screwdrivers or manually in the die holder in steel up to 900 N/mm² strength, cast iron and non-ferrous metals (e.g. aluminium, aluminium alloys and magnesium alloys)
Quantity:
1
x
1
x
HSS Performance die for standard metric ISO thread
THRDIE-HSS-WN-STEEL-PERFORMANCE-M10
Description:
10 mm; M10
HSS high-performance, nitrated die for the manufacture and repair of standard metric ISO threads according to DIN 13 with cordless drill screwdrivers or manually in the die holder in steel up to 900 N/mm² strength, cast iron and non-ferrous metals (e.g. aluminium, aluminium alloys and magnesium alloys)
Quantity:
1
x
1
x
HSS Performance die for standard metric ISO thread
THRDIE-HSS-WN-STEEL-PERFORMANCE-M12
Description:
12 mm; M12
HSS high-performance, nitrated die for the manufacture and repair of standard metric ISO threads according to DIN 13 with cordless drill screwdrivers or manually in the die holder in steel up to 900 N/mm² strength, cast iron and non-ferrous metals (e.g. aluminium, aluminium alloys and magnesium alloys)
Quantity:
1
x
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Tool case with transport rollers
Radiator anti-freeze HOAT G11 -18
Radiator anti-freeze HOAT G11 -18
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
Butane gas
Industrial hand cleaner classic
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
Rust remover Rost-Off
Engine oil performance improver
Furnace putty 1000
