Formwork tape
Formwork tape
MASKTPE-FM-FORMWORK-6MMX19MMX10M
Register now and access more than 125,000 products
- The tape fills out the joint and prevents liquid concrete sludge from getting into the formwork joint.
Not suitable for permanent sealing of joints. The surface must be dry and free from dust, oil and grease.
The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Material | Foam material |
Colour | White |
Length | 10 m |
Width | 19 mm |
Thickness | 6 mm |
Thickness of adhesive tape | 6 mm |
Min. processing temperature | 10 °C |
Max. processing temperature | 40 °C |
Min./max. temperature resistance | -30 to 100 °C |
Dynamic peel strength at 25 mm | 16 N |
Dynamic peel strength conditions | in accordance with EN 1939 |
Shelf life from production/conditions | 24 Month / at room temperature |
Datasheets(X)