HSCo spot weld drill bit
HSCo spot-weld drill bit
DRL-SPTWELD-HSCO-D6MM
Register now and access more than 125,000 products
Extra-stable tip geometry for difficult drilling conditions with all common hand drills
Optimised tip geometry for a longer service life compared to conventional spot weld drills
Excellent centring of the drill bit on the spot weld and precise drilling
115° centring point
Burr-free drilling
180° tip angle on the milling corners
Product packaging made of 100 % PCR (recycled plastic from household waste), 100 % recyclable and Cradle to Cradle Certified® Bronze
- Not for use in pneumatic machines (e.g. Vario drill, Spitznagel etc.)
- Do not use in drills with an impact chuck or spindles
Datasheets(X)
- For drilling thin-walled workpieces made of sheet steel <= 850 N/mm², brass sheeting, aluminium sheeting, zinc sheeting, copper sheeting and plastic panels
- Suitable for use in drills with 3-jaw chucks
Ensure a constant rotation speed is maintained
Maximum rotation speed
- Max. 1100 rpm for ∅ 6 mm
- Max. 850 rpm for ∅ 8–9 mm
- Max. 650 rpm for ∅ 10 mm
Use coolants and lubricants if possible
Quality | Würth-Standard |
Cutting material | HSCo |
Surface | Plain |
Suitable for tensile strength up to | 850 N/mm² |
Diameter | 6 mm |
Length | 66 mm |
Chip flute length | 28 mm |
Shank diameter | 6 mm |
Shank style | Cylindrical |
Type | Standard DIN 1897 |
Service life (points system) | 2 of 4 points |
Drilling speed (point system) | 2 of 4 points |
Bore hole quality (point system) | 4 of 4 points |
Versatility (points system) | 2 of 4 points |
Drilling behaviour (point system) | 3 of 4 points |
Last viewed
Heavy-duty anchor W-TM type A with internal thread
Pan head tapping screw, C shape with H recessed head DIN 7981, A4 stainless steel, shape C, with tip
Pan head tapping screw, C shape with H recessed head DIN 7981, A4 stainless steel, shape C, with tip
W-VD-A/S anchor rod for W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete, zinc-plated steel
Two-hand angle grinder EAG 20-230
Tapping and chipping hammer BMH 45-XE
Flat chisel with SDS-max drive arbor
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
TWO-WAY PNEUMATIC BLOW-OUT GUN SET
Pan head tapping screw, C shape with H recessed head DIN 7981, A4 stainless steel, shape C, with tip