HSS spot weld drill bit
HSS spot weld drill bit
DRL-SPTWELD-HSS-D6MM
Register now and access more than 125,000 products
Special drill bit for removing spot welds
Fixed centring tip means that no centre punching is required
Improved PLUS centring tip also suitable for use on high-strength sheet metal
The optimised tip geometry ensures a longer service life than for conventional spot weld drill bits.
Suitable for use in any standard drill
Recommended rotation speed:
- For dia. 6: up to 920 rpm
- For dia. 8: up to 700 rpm
Product packaging made of 100 % PCR (recycled plastic from household waste), 100 % recyclable and Cradle to Cradle Certified® Bronze
Tips for increasing the service life of the centring point:
- Do not use in drills with an impact chuck or spindles.
- Set the drill to a suitable rotation speed; the rotation speed of compressed-air devices is generally set too high.
Datasheets(X)
Diameter | 6 mm |
Length | 65 mm |
Chip flute length | 28 mm |
Last viewed
Thread die HSS DIN EN 22568 for standard metric ISO threads
Angle grinder, pneumatic, spare parts
Tapping and chipping hammer BMH 32-XE
Pant & Shirt 195 gsm
MBS HW cylinder saw
Hexagon bolt with thread up to head
100% Cotton Coverall 280 gsm
Lock washer For shafts DIN 6799, phosphated steel
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
System case 4.4.1