Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Hole puncher splitting punch metric
HOPNCH-(PNCH-MTRX)-M63-D63,5MM
Register now and access more than 125,000 products
Individual (without draw bolt)
Long service life
Specially developed cutting geometry
3x splitting of the material in the die — no punching waste sticks to the draw bolt, guaranteed even tool wear and precise, burr-free, circular holes
Precise alignment with the cross line
4 notches on the die
For draw bolt Ø19.0 mm, pre-cutting is also possible with sheet metal puncher size M20 (PG 13.5) as an alternative.
For pre-drilling: HSS twist drill, art. no. 0624...
For greasing the draw bolt: AL 1100 art. no. 0893 110 1
Diameter | 63.5 mm |
Thread type x nominal diameter | M63 |
Screw diameter x screw length | 19 x 75 mm |
Drill diameter | 19.5 mm |
Suitable for max. sheet metal thickness | 3 mm |
Material to be processed | Steel, Aluminium, Copper, GRP |
| Material thicknesses that can be perforated | |||
| Material | Screw dia. 6 mm | Screw dia. 9.5 mm | Screw dia. 19 mm |
| St 37 | 2 | 2 | 3 |
| Aluminium | 2 | 2 | 3,5 |
| Copper | 2 | 2 | 3,5 |
| Fibreglass | 2 | 2 | 3,5 |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hydraulic manual crimping pliers B12 for wire cable terminals in cases, without crimping jaws
Wire end ferrule with plastic sleeve
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Flat washer with chamfer ISO 7090, steel, 200 HV, zinc flake, silver (ZFSH)
IPA isopropanol cleaner
1-inch impact socket wrench assortment 8 pieces
1/2" socket wrench insert metric, bi-hex, short
Rechargeable battery Li-ion 18 V BASIC M-CUBE
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
