Impact tool Pin punches with pilots in accordance with DIN 6450
Pin punch, locking pins
PINPNCH-TAP
Register now and access more than 125,000 products
Chromium-vanadium air hardening steel
Tempered safety hammer heads
Prevents hammer head from developing bulges or splintering
Fully hardened shaft
Particularly tough and wear-resistant as a result
Pilots on shaft of pin punch
Used to perfectly centre tool on clamping sleeves.
Datasheets(X)
 | |
Length (l1) | 180 mm |
Blade length (L2) | 95 mm |
Width of tip (d) | 6 mm |
Striking-surface diameter (a) | 10 mm |
Length of tenon | 5 mm |
Diameter of tenon | 3 mm |
Last viewed
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Screwless hose clamp low overall height
Metric double box-end wrench with POWERDRIV®
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
ADJUSTABLE SPANNER
Cylinder tapping screw, shape C with slot DIN 7971, steel, zinc-plated, blue passivated (A2K), shape C
Twist Drill bit HSCO DIN 338 TYPE RN
Water pump pliers DIN ISO 8976