Injectable mortar WIT-PE 500 WIT-PE 500 for concrete and post-installed rebar connection

Name: Injectable mortar WIT-PE 500 WIT-PE 500 for concrete and post-installed rebar connection
Brand: Würth
SKU: 0903480001

Injection mortar WIT-PE 500
ANC-MORT-(WIT-PE500)-SBSCART-385ML

Art.-no. 0903480001

EAN 4053479331539

All versions

Specification

Long processing time, ideal for deep effective anchorage depths

Two-component reactive resin mortar, pure epoxy, styrene-free

Individual attachment in cracked and non-cracked concrete, seismic performance category C1 (M12 to M30) and C2 (M12, M16):

Anchor rod W-VD-A, anchor rod W-VI-A, standard threaded rod with acceptance test certificate 3.1

Reinforcement attachment with subsequent mortaring (REBAR)

Cartridge can continue to be used until the best before date, by changing the mixer nozzle or resealing it with the end cap

Proof of Performance

European Technical Assessment ETA-09/0040: Individual fixing point + cracked and uncracked concrete (anchor rod W-VD-A, anchor rod W-VI-A, standard threaded rod with acceptance test certificate 3.1), seismic performance category C1 (M12 to M30) and C2 (M12, M16)

European Technical Assessment ETA-07/0313: Post-installed rebar connection (REBAR)

Application area

Post-installed rebar connection (REBAR)

Heavy steel structures

High bays

Create the drill hole

Clean the drill hole: 4x blow out with compressed air > 6 bar

Place the embedment depth mark on the rod and check the drilling hole depth

Screw mixer to cartridge; use application gun

Before using, press out about 10 cm of product (not into the drill hole)

Mount injection equipment, fill composite mortar from bottom of drill hole

Insert the reinforcement bar until it reaches the mark, turning slightly

Visual check of the mortar volume, observe maximum processing time

Attach component after observing curing time

Make the drill hole, break out the drill core

2x flush with water (Until clear water comes)/brush 2x/flush 2x with water (Until clear water comes)

2x blow-out/2x brush-out/2x blow-out

Place the embedment depth mark on the rod and check the drilling hole depth

Screw mixer to cartridge; use application gun

Before using, press out about 10 cm of product (not into the drill hole)

Mount injection equipment, fill composite mortar from bottom of drill hole

Insert the reinforcement bar until it reaches the mark, turning slightly

Visual check of the mortar volume, observe maximum processing time

Attach component after observing curing time

European Technical Assessment ETA-09/0040: Individual fixing point + cracked and uncracked concrete (anchor rod W-VD-A, anchor rod W-VI-A, standard threaded rod with acceptance test certificate 3.1), seismic performance category C1 (M12 to M30) and C2 (M12, M16)

European Technical Assessment ETA-07/0313: Post-installed rebar connection (REBAR)

Application

Application area

Suitable for attaching metal structures, metal profiles, wooden structures, brackets, pipes, cable conduits etc.

Suitable for structural expansions, ceiling and wall attachments, expansion of load-bearing structures, reinforcement of load-bearing structures, attachment of balconies and canopies, sealing of temporary openings and "forgotten" reinforcing bars

Technical information

Type description	WIT-PE 500
Container	Double cartridge
Contents	385 ml
Included in delivery	Mortar cartridge 385 ml (side-by-side) + 1 x mixer nozzle
Suitable application gun	Battery-powered application gun 585ml, Pneumatic application gun 585ml, EasyMax 385 ml, HandyMax 585 ml
Min./max. processing temperature /conditions	5 to 40 °C / temperature in the anchorage ground during processing and hardening
Min./max. ambient temperature / Conditions	-40 to 72 °C / after completely curing process
Temperature resistance, long-term temperatures max.	43 °C
Temperature resistance, short-term temperatures max.	72 °C
Shelf life from production/conditions	24 Month / cool and dry storage area, 5°C to 25°C
Approval	ETA-09/0040, ETA-07/0313
Chemical basis	Pure-Epoxy, styrene free
Colour	Red

Documents

Product information

Würth Catalogue (1)

Catalogue page as PDF 1

Datasheets (0)

Certificates/ Documents (0)

Accessory

Required accessory:

Product

Description

Quantity

Excl. Vat Price
/PU

Pneumatic 2C application gun WIT

APPLGUN-PN-(WIT-385/585ML)

Art.-no. 0891017

Pneumatic version

x 1 pcs

Cordless application gun WIT

APPLGUN-CORDL-ANC-WIT-M-KST-585ML

Art.-no. 0891003585

Powerful Li-ion battery-powered application gun for WIT cartridges

x 1 pcs

Mixer nozzle for WIT-PE 500 and WIT-VM 250 cartridges

MIX-DWL-(F.WIT-PE500)-PLA

Art.-no. 0903488101

For mixing injectable mortar components

x 10 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).