Internal puller
Internal extractor
INEXTR-(D8-12MM)
Register now and access more than 125,000 products
- Specially shaped extraction hooks grip the internal ring edge of the ball bearing precisely
- Extraction jaws are twisted and hardened
Spindle thread diameter for 0714525058, 0714525059 and 0714525060 is M14 x 1.5 mm
Datasheets(X)
Insert the internal puller into the hole. Screw in the spindle, holding the nut to prevent it turning. The extraction jaws open and the extraction tips clamp beneath the bearing. Screw the slide hammer or counter-support onto the connection thread and extract the bearing.
 | |
Min./max. drill hole diameter (ØA) | 8-12 mm |
Diameter of extraction jaws (B) | 6.8 mm |
Length of extraction jaws (C) | 15 mm |
Spindle diameter (G) | 26 mm |
Spindle length (D) | 64 mm |
Length (E) | 106 mm |
Last viewed
W-VD-A/S anchor rod for W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete, zinc-plated steel
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Micrometer With reference dimension
Seat protector, nylon
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
All weather silicone sealant for glazing
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Adhesive lubricant HHS® 500
POE oil POE 100