MG III fire protection cement

Name: MG III fire protection cement
Brand: Würth
SKU: 089330725

Fire protection cement MG III
FPCMNT-MGIII-25KG

Art.-no. 089330725

EAN 4099617009922

All versions

Prices for customers after login

MG III fire protection cement

Art.-no. 089330725

Prices for customers after login

Quantity

x 42 pcs

Exclusively for trade customers

Login/Register
Call customer service: +971 50 8582034

Mortar belonging to mortar group III in accordance with DIN 1053-1, classified as building material A1 in accordance with DIN 4102-4

Seals off fire and flue gases, reduces temperature, seals off rooms, resistant to splash water and extinguishing water jets, mechanically stable

Ready-to-use mixture

Firm even at higher construction heights

Suitable for

Pumps

Presses

Manual installation

Notice

To insulate ducts in walls and ceilings, always use A1 or A2 mineral wool in accordance with DIN 4102

with a melting point < 1,000 °C.

Fire protection cement mortar from mortar group III

Text certificate issued by MPA Hannover

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For use in system [A], [B1], [F], [F2], F3, [G1], [G2], [H], [H1], [H2], [H3], [I]

Combination partition [A]

Cable box [B1]

Pipe partition M, [F]

Pipe partition M light, [F2]

Pipe partition I plus/I iso, F3

Pipe partition intumescent, [G1]

Pipe partition dB, [G2]

Pipe partition Z, [H]

Pipe partition KL, [H1]

Pipe partition intumescent mat plus, [H2]

Pipe partition intumescent strip plus, [H3]

Joint system K, [I]

Seals wall and ceiling ducts for insulated and non-insulated non-flammable pipes.

Can also be used to seal partitions with several ducts as there is no limit to pipe diameter or partition dimensions

Seals wall and ceiling ducts for insulated and non-insulated plastic pipes with a diameter of < 32 mm without further measures.

Container	Sack
Weight of content	25 kg
Colour	Grey
Building material class	A1 - Non-flammable
Chemical basis	Cement
Density	1.2 g/cm³
Shelf life from production	12 Month
Conditions to maintain shelf life from production	at 23°C and 50% relative humidity
Building material class conditions	in accordance with DIN 4102

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.