Metal cavity anchor W-MH/SH screw hook
Cavity anchor W-MH/SH screw hook
DWL-(W-MH/SH)-HOK-(5-16)-(A1K)-M6X75/53
Register now and access more than 125,000 products
- Excellent holding power due to spreading supporting elements with large contact radius
- Simple setting with associated mounting pliers
- Pre-assembled with screw hook
- Anti-rotation lock on the collar prevents movement in the drill hole
- Screw hook can be loosened without loss of holding power
The standard screw belonging to the anchor can be changed for another fastener with a metric thread of the same size after the anchor has been expanded, e.g. eyelet, screw with special head, A2/A4 brass screw, threaded rod etc.
On hard substrates, such as tiles, the lugs on the collar (anti-rotation lock) must be bent straight.
Pushing the front lever on the ratchet pliers releases the ratchet pliers again.
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/normal/348px/14534363.jpg)
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/normal/348px/14534368.jpg)
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/normal/348px/60011143.jpg)
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/category/348px/47704.jpg)
Create the drill hole
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/category/348px/47684.jpg)
Install anchor
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/category/348px/47685.jpg)
Expand anchor fully with pliers
![](https://media.wuerth.com/stmedia/wuerth/images/std.lang.all/resolutions/category/348px/47683.jpg)
Secure component
Datasheets(X)
- The anchor for secondary attachments in hollow and lightweight construction walls made of panel materials, and in hollow brick ceilings or hollow core ceilings up to a maximum thickness of 32 mm, behind which is a cavity
- For attaching furniture or furnishings such as shelves or picture frames.
Type description | W-MH/SH |
Thread type x anchor diameter | M6 |
Design | With screw hook |
Min./max. board thickness/mirror thickness (d a) | 5-16 mm |
Material | Steel |
Nominal drill-bit diameter (d 0) | 12 mm |
Surface | Zinc plated |
Sleeve length (lHü) | 53 mm |
Screw length | 75 mm |
Through-hole in the component to be connected (d f) | 7 mm |
Anchor diameter [mm] | M6 | ||
Performance data | |||
Recommended loads1 | Plasterboard d ≥ 12 mm | Frec. [kN] | 0,20 |
Plasterboard d ≥ 25 mm | Frec. [kN] | 0,30 | |
Hardboard d ≥ 4 mm | Frec. [kN] | 0,25 | |
Hardboard d ≥ 10 mm | Frec. [kN] | 0,30 | |
Particle board d ≥ 10 mm | Frec. [kN] | 0,25 | |
Hollow ceiling brick d ≥ 30 mm | Frec. [kN] | 0,30 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!