Nail HNS 103/18 In accordance with DIN EN 206
Nail HNS 103/18
NL-HNS103-DISC18MM-32MM
Register now and access more than 125,000 products
Improved drive-in properties thanks to "loose" washer structure
Length calculation for nails used on concrete substrates:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
Length calculation for nails used on steel substrates (min. thickness 5 mm):
Penetration depth (min. 8 mm/max. 12 mm) + thickness of component to be fastened = nail or shank length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
Datasheets(X)
 | |
Material of nail | Steel |
Surface of the nail | Zinc plated |
Material of washer | Steel |
Surface of the washer | Zinc plated |
Washer thickness | 2 mm |
Shaft length (SL) | 32 mm |
Shank diameter (Øds) | 3.7 mm |
Washer diameter (ØS) | 18 mm |
Head diameter (Ødk) | 8 mm |
Suitable for device type | Würth BST 350 |
Last viewed
ASSY® 4 CS fittings screw Steel zinc plated full thread countersunk head
1/2 inch POWERDRIV® socket wrench insert metric, bi-hex, long
Halogen bulbs, com. veh., Truckstar Osram
VDE pliers assortment, combi IEC 60900 8 pieces
Fabric shrink hose Shrink rate 2:1
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, A4 stainless steel, plain
Wire end ferrule with plastic sleeve
Long hammer handle For Simplex soft-face hammers
Washer with large outside diameter DIN 9021 (with large outside diameter), steel, zinc-plated, blue passivated (A2K)
Flat conn. cont. Junior Timer (JT) 2.8