Nail anchor SHARK^®Hammer TYPE FK

Name: Nail anchor SHARK ® Hammer TYPE FK
Brand: Würth
SKU: 590630630

SHARK HAMMER nail anchor flat collar type FK
DWL-(SHARK HAMMER)-FK-PLA-NL-5-6X30
ZEBRA-SHARK

Art.-no. 590630630

EAN 4061975319814

All versions

Specification

With fast assembly and proven performance, this product offers an all-round solution for fastening light loads using push-through installation. Wall plug body with flat collar nail made of zinc plated steel

Quick, cost-effective installation

Anchor and nail screw are pre-assembled, no need to search for a suitable screw

For use in push-through installation

Can be removed via drive in screw head

Defined integrated hammer-in stop prevents premature expansion

Resistant to UV rays

Rot-resistant (plastic anchor made of high-quality polyamide)

Temperature-resistant from -40°C to +100°C

For countersinking and leaving protruding

Countersunk head design countersinks itself automatically in soft wood

Halogen-free

Proof of Performance

European Technical Assessment ETA-19/0182: SHARK^®Hammer sizes 6 and 8 for anchors in a non-structural system based on a redundant design in concrete

European Technical Assessment ETA-19/0182: SHARK^®Hammer 8 for anchors in a non-structural system based on a redundant design in masonry (exception: dimensions M8 x 45)

Performance data
Anchor diameter [mm]			6	8
Permissible tensile load	B25 or C20/25 concrete	Fadm [kN]	0,2	0,2
	Sand-lime brick KS 12		-	0,12
	Hollow sand-lime brick KSL 12		-	0,075
Characteristic values
Tightening torque (THREAD type only)		T_{i_nst}[Nm]	4	4
Drill hole depth		h₁ ≥ [mm]	35	45
Embedment depth		h_nom ≥ [mm]	30	40
Thread dia. (THREAD type only)		d_thr [mm]	M6	M8
Thread length (THREAD type only)		I_thr [mm]	6	9
Nominal drill diameter		d₀ [mm]	6	8
Hole diameter in component		d_f [mm]	6,5	8,5

Application area

C-profile rails in dry walling

Cable ducts

Drill the hole

Remove drill cuttings

Anchor sleeve temperature ≥ 0 °C

Temperature in base material ≥ 0 °C

Insert anchor through the component into the drilled hole

Knock in expansion nail until flush

European Technical Assessment ETA-19/0182: SHARK^®Hammer sizes 6 and 8 for anchors in a non-structural system based on a redundant design in concrete

European Technical Assessment ETA-19/0182: SHARK^®Hammer 8 for anchors in a non-structural system based on a redundant design in masonry (exception: dimensions M8 x 45)

Application

Application area

Can be used in concrete and masonry

All fastenings in interior finishing as well as the wood, metal, plumbing, sanitation and electrical industries. For light loads

Uses include: securing angle brackets, panels, metal sheets, cable ducts and any components for non-recessed installation

Technical information

Anchor diameter	6 mm
Anchor length (l)	30 mm
Max. attachment height (t fix)	5 mm
Embedding depth (h nom)	30 mm
Nominal drill-bit diameter (d 0)	6 mm
Drill hole depth (h 1)	35 mm
Hole diameter in component (d f)	6.5 mm
Material of nail	Steel
Surface	Zinc plated
Internal drive	Z2