PUR 250 type 175 insulation pipe clamp With screws, a permanent PUR hard foam coating and rubber shell on the inside

Material of insulation

Polyurethane

Volumetric weight

250 kg/m³

Min. compressive strength

3.96 N/mm²

Material of clamp

Steel

Surface of the clamp

Zinc plated

Min./max. temperature conditions

-160 to 130 °C

Heat conductance λ

0.043 W/(m*K)

Heat conductance λ conditions

at 0°C, according to test report F.2-1088a/04

Building material class

B2 - Normally inflammable

Building material class conditions

in accordance with DIN 4102, according to test report H-066/17

Min. water-vapour diffusion resistance factor value µ

1000

Conditions for water-vapour diffusion resistance

according to test report R-62a/05

Diameter (ØD)

60.3 mm

Insulating-material thickness (DS)

30 mm

Insulation width (B_D)

50 mm

Connection thread (G)

1/2 inch, M8, M10

Suitable for steel pipe (outer diameter) (D)

60.3 mm

Suitable for steel pipe, DN nominal width

DN.. 50..

Internal drive

HS5

Suitable for steel pipe (imperial)

2 inch

Free of halogenated blowing agents (< 0.1 %)

Yes

Free of hexabromocyclododecane (< 0.1 %)

Yes

SVHC according to REACH < 0.1 %

Yes

Free of chlorinated paraffins (< 0.1 %)

Yes

Free of boron tris-(2-carboxyethyl)-phosphine (< 0.1 %)

Yes

Free of polybrominated diphenyl ethers (< 0.1 %)

Yes

Free of polybrominated biphenyls (< 0.1 %)

Yes

Free of boron compounds (< 0.1 %)

Yes

Free of lead (< 0.1 %)

Yes

Free of tin (< 0.1 %)

Yes