Pipe cable lug with inspection hole
Tubular cable lug with inspection hole (common)
TUBCBLLUG-INSPHO-CU-(J2N)-M6-6SMM
Register now and access more than 125,000 products
The user must check the inserted cable (by means of a pull-out test, if necessary).
Datasheets(X)
For multi-wire round conductors, such as compliant with DIN EN 60228 Class 2
for round-pressed sector cables
 | |
Wire cross section | 6 mm² |
Flange hole | M6 |
Wire diameter (d1) | 3.5 mm |
Diameter of hole (d2) | 6.4 mm |
Distance between sleeve end and centre of hole (e) | 20.5 mm |
Sleeve length (a) | 9.5 mm |
Width (b) | 12 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Machinist's hammer German design in accordance with DIN 1041
Grinding wheel disc for steel
Crimping pliers With integrated locator
Slotted cheese head DIN 84, steel 4.8, plain
Single wire seal (SEAL) For uninsulated cable connector
Safety goggles DBE2
Release tool, universal assortment 16 pieces in system case 4.4.2
Charger for battery starter
Ring-shaped crimp cable lug DIN 46234 and similar
Twist Drill bit assortment DIN 338 HSS