Plastic multi-purpose anchor SHARK^® Pro

Name: Plastic multi-purpose anchor SHARK ® Pro
Brand: Würth
SKU: 590621056

Plastic multi-purpose anchor Shark Pro
DWL-(SHARK PRO)-PLA-10X56
ZEBRA-SHARK

Art.-no. 590621056

EAN 4056807515724

All versions

Specification

The most versatile plastic anchor. Knots into cavities, expands in solid materials

Ensures knotting in all cavities and expansion in all solid materials

Anti-rotation device or twist lock prevents turning in the drill hole

Patented anchor head causes knotting of the anchor shaft when the screw is screwed in

Quick and easy installation

Low installation torque and high fixed torque

Suitable for pre-positioned and push-through installation

Fold-down anchor collar

The hammer-in stop prevents premature expansion during push-through installation

Resistant to rotting, weathering and ageing

UV resistant < 6 weeks

Made from high-quality polyamide (nylon)

Halogen- and silicone-free

Thermally stable from -40°C to +100°C

Notice

For mounting, we recommend the ASSY-D plug screw

Application area

Autoclaved aerated (cellular) concrete

Vertically perforated brick

Plasterboard

Concrete

Hollow calcium silicate block

Drill the hole

Remove drill cuttings from drill hole

Install anchor

Screw in screw until flush

Drill the hole

Install anchor

Screw in screw until flush

Drill the hole

Install anchor

Screw in screw until flush

Application

Application area

Universal plastic anchor

In concrete, solid brick, solid sand-lime brick, vertically perforated brick, hollow sand-lime brick, aerated concrete, plasterboard, gypsum fibreboard

Suitable for attaching

Wardrobes, curtain rails, wall shelves, lightweight wall cupboards, picture frames, mirrors, lamps, cable ducts, cable clamps, electrical switches, wash basins, towel rails, signs, motion detectors, etc.

For attaching components in conjunction with a wood or chipboard screw (without drill tip, counter thread, ring thread) (e.g. ASSY-D)

Can be used outdoors or in wet rooms in conjunction with a stainless steel screw

Technical information

Anchor diameter	10 mm
Material	PA - Polyamide
Colour	Anthracite
Anchor length (l)	56 mm
Nominal drill-bit diameter (d 0)	10 mm
Drill hole depth (t)	65 mm
Edge clearance (a r)	80 mm
Embedding depth (h s)	55 mm
Min./max. required screw diameter	6-8 mm
Required screw length (l s)	Thickness of the add-on part (+ plaster/insulation thickness) + anchor length + screw diameter
Type description	SHARK PRO
Min./max. temperature conditions	-40 to 100 °C

Performance data
Anchor diameter [mm]			5	6	8	10	12	14
Recommended loads¹⁾	Concrete ≥ B25; C20/25	F_rec [kN]	0,5	0,9	1,1	1,9	2,4	2,8
	Solid bricks ≥ Mz12; KS12		0,3	0,5	0,7	1,4	1,7	1,7
	Vertically perforated brick ≥ Hlz12²⁾		0,1	0,2	0,2	0,3	0,3	0,4
	Hollow sand-lime bricks ≥ KSL12²⁾		0,2	0,4	0,6	1,0	1,0	1,0
	Aerated concrete PB2; PP2²⁾		0,05	0,1	0,1	0,15	0,2	0,35
	Gypsum plasterboard d = 12.5 mm ²⁾		0,1	0,1	0,1	0,1	0,1	0,1
	Gypsum plasterboard d = 25 mm ²⁾		0,15	0,15	0,15	0,15	0,15	0,15
	Gypsum fibreboard (Fermacell)²⁾		0,2	0,2	0,2	0,25	0,25	0,25

Other installation recommendations:
Edge distance	a_r ≥ [mm]	30	35	40	50	65	80
Screw diameter in panel building materials	d_scr2 [mm]	3	4	4,5	6	8	10
Screw length	l_s [mm]	Thickness of the add-on part (+ plaster/insulation thickness) + anchor length + screw diameter
¹⁾ These values apply when using wood screws with the largest screw diameter. ²⁾ The drill hole is to be made with a rotary drill (without impacting or hammering).

Documents

Product information

Würth Catalogue (1)

Catalogue page as PDF 1

Datasheets (0)

Certificates/ Documents (0)

Delivery scope

Plastic multi-purpose anchor SHARK^® Pro including:

Plastic multi-purpose dowel set SHARK<SUP>®</SUP> Pro

400 x

Plastic multi-purpose dowel set SHARK® Pro

PLASTIV MULTI-PURP. DOWEL SHARK® PRO SET

Description:

10 x 56 mm

1,800 pieces. The most versatile plastic anchor. Knots into cavities, expands in solid materials.

Quantity: 400 x

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).