Position finder MD 12
Position finder MD 12
TRACKSYS-MD12
Register now and access more than 125,000 products
Easy detection
- Automatic calibration ensures quick operation with no measurement errors
- Straightforward location of live and de-energised cables
- Clear drilling guide with a three-colour LED ring and accurate indication of the object centre using the "centre finder" scale
- Illuminated display means results can be read out easily even in low light
- Three detection modes: Dry walling mode, metal mode and live cable mode
- Deep locating depth enables the location of objects up to 120 mm deep
Convenient to use
- Compact and ergonomic design for comfortable operation
- Long battery life with automatic switch-off after 5 minutes of inactivity
Datasheets(X)
The position finder can be used in a variety of fields to locate ferrous and non-ferrous metals, wooden substructures and live cables. This makes it ideal for construction and renovation projects, installations and for mounting fixtures on walls and ceilings.
Max. detection depth | 120 mm |
Steel detection depth | 120 mm |
Copper detection depth | 80 mm |
Current-carrying line detection depth | 50 mm |
Wooden substructure detection depth | 38 mm |
Automatic switch-off | 5min |
Battery designation | 9 V block; 6LR61; 6AM6 |
Number of rechargeable batteries/batteries | 1 PCS |
Length | 200 mm |
Width | 85 mm |
Height | 32 mm |
Last viewed
Twist drill bit HSS DIN 338 type RN 130°
Flat connector contact Standard Power Timer(SPT) 4.8/5.8
Klebfix superglue
Automatic welding helmet WSH II 3/11
Screw, pan head for plastics
65/35% Polyester / Cotton Coverall 155gsm
Spacer sleeve Hexagon, zinc-plated steel
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Washer Inch, zinc-plated steel (A2K)