Powerbond bodywork adhesive - BDYWRKADH-2C-POWERBOND-CARTRIDGE-225ML

Powerbond bodywork adhesive - BDYWRKADH-2C-POWERBOND-CARTRIDGE-225ML - 1

Powerbond bodywork adhesive - BDYWRKADH-2C-POWERBOND-CARTRIDGE-225ML - 2

Powerbond bodywork adhesive

Name: Powerbond bodywork adhesive
Brand: Würth
SKU: 0893450100

Bodywork adhesive Powerbond
BDYWRKADH-2C-POWERBOND-CARTRIDGE-225ML

Art.-no. 0893450100

EAN 4066443139963

All versions

Prices for customers after login

Powerbond bodywork adhesive

Art.-no. 0893450100

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +971 50 8582034

High-strength 2-component epoxy resin system for bodywork repairs

High-strength epoxy resin adhesive

The repair restores the original strength and stiffness

Fewer spot welds

Meets the requirements of automotive manufacturers

Glass particle technology

Even if too much pressure is exerted, an adhesive layer thickness of 0.25 mm is guaranteed

Excellent stability

The adhesive will not run on vertical surfaces (thixotropic)

Excellent corrosion protection

The original degree of rust resistance is maintained

Corrosion is prevented from occurring at spot welds

Weldable

Can be sanded and painted over

Silicone- and VOC-free

Notice

Not suitable for load-bearing bodywork parts (e.g. A-pillars, longitudinal chassis beams etc.). When replacing parts, do not glue on visible surfaces, as "shadow lines" may appear. The product must be stored in a frost-free location. For cordless or pneumatic guns, the lowest setting/feed should be used to prevent the cartridge from deforming.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Structural adhesive for steel, aluminium, stainless steel and glass fibre-reinforced plastics (GFRP, CFRP). For bonding bodywork parts such as mudguards, side walls, wheel arches, roof panels and door panels.

Instructions

The substrate must be capable of bearing loads and must be clean, dry and free from grease and rust. Old adhesive residues must also be removed. Observe the processing instructions. For more information, refer to the technical data sheet.

Container	Double cartridge
Chemical basis	Epoxy resin
Colour	Black
Density	1.1 g/cm³
Smell/fragrance	Characteristic
Min. tensile strength	30 N/mm²
Min. combined tension and shear resistance	28 N/mm²
Conditions for combined tension and shear resistance	after four hours, 23°C, EN 1465
Conditions for tensile strength	at 23°C, in accordance with ASTM D-638
Shore D hardness	80
Conditions for Shore hardness	in accordance with DIN 53505
Working life	60 min
Conditions for working life	at 23°C
Curing time	4 h
Min./max. temperature resistance	-30 to +120 °C
Min./max. processing temperature	15 to 25 °C
Max. short-term temperature resistance	190 °C
Max. final strength	24 h
Conditions for final strength	at 23°C
Resistance against	Petrol Diesel Cooling liquid Engine and gear oils
VOC-free	Yes
Silicone-free	Yes
Shelf life from production	12 Month
Additional articles	Acetone cleaner, art. 0893460; Quattro rust stop, art. 08932141; pneumatic axial grinder, art. 07032310; Flexi-Disc, art. 0578705 …; nylon fleece disc, art. 067322 50/75; mini fleece disc, art. 0673205.../207...; locking pliers, art. 071409...
Contents	225 ml

Additive article:

Product

Description

Quantity

Excl. Vat Price
/PU

Pneumatic grinder DSW 22

DIEGRIND-PN-DSW22

MASTER

Art.-no. 07032310

Long-life, handy rod grinder, angled design, with tool-free speed control and rubberised handle to protect against vibrations and cold hands.

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 1

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.