Push-in rivet, type 2
Push-in rivet, type 2
MP-HONDA-IMPACTRIVET-BLACK
Register now and access more than 125,000 products
Straightforward fitting and removal
Manual fitting also possible
High retention force and a secure fit in the component
Datasheets(X)
Sheet metal attachments
Min./max. drill hole diameter | 10-10.2 mm |
Min./max. attachment thickness | 4-5 mm |
Length | 3.6 mm |
Length below head (A) | 3.6 mm |
Head diameter (B) | 9.8 mm |
Head height (C) | 3.6 mm |
Colour | Black |
Material | PA 6 - Polyamide |
Suitable for vehicle manufacturer | Honda |
Corresponds to original spare part number | 91503SZ3003 |
Corresponds to original spare part number 2 | 90658sg0004 |
installation location | Bodywork |
Last viewed
ADJUSTABLE SPANNER
Polishing pads
Round head screw with square neck and nut DIN 603 with nut, steel, strength class 4.8, zinc-plated, blue passivated
Small abrasives mini fibre disc
Drop-in anchor W-ED/S-BND
ASSY® 4 CS fittings screw Steel zinc plated full thread countersunk head
Sanding belt mount For sanding belts
Battery SD 9.6 volt
Rosette Brass, MS 63 F 30, black oxide
1/2 inch impact socket wrench insert hexagon, metric, short