Quick-release anchor W-DS/S

Name: Quick-release anchor W-DS/S
Brand: Würth
SKU: 0905363001

Quick action anchor for ceilings W-DS/S
ANC-(W-DS/S)-(A2K)-6X75

Art.-no. 0905363001

EAN 4050641979339

All versions

Individual price display after login

Quick-release anchor W-DS/S

Art.-no. 0905363001

Individual price display after login

Quantity

x 100 pcs

Exclusively for trade customers

Login/Register
Call customer service: +971 50 8582034

Ceiling anchor for hanging system ceilings, ventilation ducts, etc. in concrete. Does not require assembly tools, so very quick and easy to assemble with good fastening capacity.

Spring anchors for suspension in ceilings

Ceiling anchor with hook for hanging system ceilings, ventilation ducts, etc. in concrete.

Approved for indoor use in dry and heated rooms

Mounts in pre-drilled holes without the need for special tools

Fabric: Electrolytically galvanized, A2K

Proof of Performance

For fitting non-load-bearing building structures in concrete, European Technical Approval ETA-13/0490

Dimensioning in accordance with the “European Technical Approval Guidelines (ETAG) for metal anchors in concrete” annex C, dimensioning method C

The anchor has European Technical Approval for use in both reinforced and non-reinforced concrete with a strength class of min. C20/25 and max. C50/60 in accordance with EN 206-1:2000-12.

Anchorage in pairs or as an anchor group in non-load-bearing building structures with ETA in concrete in cracked (tension zone) and crack-free concrete (compression zone)

Create the drill hole

Clean the drill hole

INSERT W-DS/S.

Fully insert W-DS/S.

Pull down the W-DS/S with a jerky movement.

For fitting non-load-bearing building structures in concrete, European Technical Approval ETA-13/0490

Dimensioning in accordance with the “European Technical Approval Guidelines (ETAG) for metal anchors in concrete” annex C, dimensioning method C

The anchor has European Technical Approval for use in both reinforced and non-reinforced concrete with a strength class of min. C20/25 and max. C50/60 in accordance with EN 206-1:2000-12.

Anchorage in pairs or as an anchor group in non-load-bearing building structures with ETA in concrete in cracked (tension zone) and crack-free concrete (compression zone)

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Suitable for fixing: light ceiling plates and ceilings, ceiling structures with wire hooks, wire suspenders, hanging brackets, strip lighting, light rails, lamps, cables, chains, etc.

The anchor can only be used indoors in dry and heated rooms.

Performance data
Anchor diameter [mm]		6
Plugs for use in concrete in non-load-bearing building structures. (for all load directions)	F_adm [kN] ≥ C20/25 and ≤ C50/60¹⁾	0,5
Würth system components (see 33.1 W-DN) ¹⁾Part safety factors for resistances that are regulated in the approval, and a part safety factor for actions on γ_F = 1.4 have been taken into account. See European Technical Approval Guidelines (ETAG), annex C, for information about tension and cross loads, edge and centre distances.

Characteristic values
Minimum spacing	s_min [mm]	200
Minimum edge distance	c_min [mm]	100
Minimum surface thickness	h_min [mm]	80
Effective anchorage depth	h_ef [mm]	33
drill diameter ²	d₀ [mm]	6
Diameter of cutting edges²)	d_cut ≤ [mm]	6,4
Drill hole depth	h₁ ≥ [mm]	40
Würth system components (see 33.1 W-DN) ²⁾ Hammer drill bits of tungsten carbide must comply with the specification in the information brochure from the Deutsches Institut für Bautechnik (The German Institute for structural engineering – DIBt) and Fachverband Werkzeugindustrie e.V. (The Federation of German Tool Manufacturers (FWI)I) concerning “characteristic values, requirements and tests for drill bits for masonry with tungsten carbide cutting edges that are used to produce drilled holes for anchorage”. Würth’s hammer drill bits meet these specifications.