Screw extractor
EXTR-SCR-(M6-M8)
Register now and access more than 125,000 products
Datasheets(X)
Drill a hole into the part being removed as shown in the table and screw in the extractor anti-clockwise. Further tightening unscrews the broken part without damaging the thread.
Suitable for screw | 1/4 inch - 5/16 inch, M6 - M8 |
Length | 57 mm |
Drill diameter | 3.2 mm |
Size | 2 |
Material | Chrome-vanadium steel |
Last viewed
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
Sealing ring, aluminium, shape A
Half-round file DIN 7261, shape E
Hose clamp with asymmetrical lock
Hammer drill bit Max Quadro-S
Deep offset ratcheting double box end set, metric 5 pieces
Chuck with lock nut
Hexagon bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Adhesive and sealing compound Super RTV silicone