Self-tapping thread insert with cutting slot

Name: Self-tapping thread insert with cutting slot
Brand: Würth
SKU: 0660301100

Thread insert with cutting slot steel zinc plated
THRINRT-SLFCUT-(DSP)-M10

Art.-no. 0660301100

EAN 4062856402007

All versions

Specification

Saves time during thread repair and thread reinforcement

For producing high-strength screw connections and other threaded connections in materials with low shear strength, e.g. cast iron, aluminium alloys, plastics, hardwood etc.

The cutting slot keeps the thread inserts anchored even during strong vibrations or shaking of the workpiece.

Chrome(VI)-free zinc thick film passivation for good corrosion protection (corrosion resistance in salt spray test according to DIN EN ISO 9227-NSS (h): 72h white rust/120 red rust)

Application area

Thread reinforcement on tools with low shear strength, e.g. cast iron, aluminium alloys, plastics, hardwood etc.

- For light metals and metals with a strength up to approx. 400 N/mm²

- For cast iron with hardness up to approx. 220 HB

- Plastic and fibreglass-reinforced plastic

(Tests on the original component are recommended, particularly near edges.)


Material	Steel, case-hardened
Surface	Zinc plated thick-layer passivation
RoHS-compliant	Yes
Thread type x nominal diameter (d)	M10
Length (L)	18 mm
Outer diameter x pitch (D)	14 x 1.5 mm
Min./max. drill hole diameter	12.7-13.4 mm