Würth UAE Contact +971 50 858 2034 | Free delivery on orders above 200 AED

Stainless steel spray Perfect

Metal surface stainless steel spray perfect
SSTSPR-PLUS-400ML

Art.-no. 0893114116
EAN 4066443098697
Prices for customers after login

Exclusively for trade customers

Register now and access more than 125,000 products

Outstanding long-term protection and optimum metal surface appearance

High layer thickness with first spray coat


  • Very safe due to optimal protection against weathering

  • Minimal time required, as only one work step is necessary

  • Provides good coverage


Versatile use thanks to adjustable spray head


Large-area and minor repairs can be carried out quickly and safely with the variable spray head.



High degree of resistance to running



High abrasion resistance

Notice

Perfect zinc spray and Perfect zinc spray, light contain zinc, and therefore offer optimum, active cathodic protection against corrosion. If the surface is damaged, the zinc coating sacrifices itself (sacrificial anode), thereby protecting the metal against rust.


Not suitable as adhesive base for PU, MS polymer and hybrid sealing compounds.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For visual enhancement, repair and protection against corrosion of metallic surfaces.

Instructions

The application surface must be clean, dry and free from grease. Remove rust and old loose paint, then sand and clean. Shake can vigorously for at least 2 minutes before use.

Chemical basis

Acrylated alkyd combination

Contents

400 ml

Colour

Stainless steel coloured
Chrome coloured

Dry layer thickness (first back-and-forth motion)

30 µm

Min. dust-drying time

15 min

Conditions for dust-drying time

at recommended dry layer thickness

Min. curing time

10 h

Max. curing time

12 h

Fully hardening/curing conditions

At recommended dry layer thickness

Max. temperature resistance

240 °C

Density

1.06 g/cm³

Coating thickness

30 µm

Recoatable/Can be painted over

Conditional, preliminary testing required

Shelf life from production

24 Month

Conditions to maintain shelf life from production

at 10°C to 25°C

Min. flashing point

-42 °C

Min. grip strength

20 min

Grip strength conditions

at recommended dry layer thickness

Cross-cut test

MAN 0-1

Cross-cut test conditions

in accordance with DIN 53151

AOX-free

Yes

Spot weldable

No

Substrates with good adhesion

Wood
Metal
Cardboard
PMMA
Polycarbonate
Polystyrene

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 2
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 3
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information