Thread mandrel With nozzle
Threaded mandrel nozzle for rivet nuts small CH
AY-MANDREL-0917101-NOZZLE-SK-M4
ZEBRA
Register now and access more than 125,000 products
Conduct your own tests before using non-Würth rivet nuts.
Attention! The use of the M8 thread mandrel is limited to the rivet nuts listed as accessories.
Thread type x nominal diameter | M4 |
Nominal diameter | 4 mm |
Datasheets(X)
Last viewed
Silicone spray grease
ALLEN KEY HEXAGONAL (HEX) - SHORT BLADE
Fuse holder For glass fuses
Hex head screw with thread up to head DIN 933, steel 8.8U, hot-dip galvanised (hdg)
Multi-point housing For blade connector 6.3 x 0.8 mm
100% Cotton Coverall 280 gsm
Snipe nose pliers DIN ISO 5745
TX bit C 6.3 (1/4 inch) with hole
Structural adhesive MS mirror adhesive
Pneumatic cleaning gun TOP Gun
