Turnbuckle closed form with welding ends
DIN 1478 plain steel, closed shape w. weld-on end
TURNBCKL-CLSD-WELDONEND-1478-M12
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1478 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
 | |
Thread type x nominal diameter (d1) | M12 |
Diameter (d2) | 18 mm |
Diameter 3 (d3) | 25 mm |
Diameter 2 (d4) | 10 mm |
Length (l1) | 125 mm |
Length (of welding end) (l2) | 150 mm |
Standards | DIN 1478 |
Material | Steel |
Surface | Plain |
RoHS-compliant | Yes |
Würth Catalogue (1)
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Fuse holder For glass fuses
1/4 inch socket wrench insert, metric short
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
1/4 INCH SOCKET WRENCH INSERT METRIC, HEXAGON (HEX), SHORT
Cetus overall
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
Wheel brush Braided steel with hole
Steel spacer stud
Stretch X trousers
