Universal fluxing agent no. 50 FM for brazing metal
Universal fluxing agent no. 50 FM f. brazing metal
BRAZFLX-NO50FM-UNI-100G
Register now and access more than 125,000 products
- Flux for brazing copper, brass and red bronze gunmetal
- DIN 29454
- White paste
The residues of the fluxing agent are corrosive and must therefore be removed.
This product is subject to the provisions of the German Chemicals Prohibition Ordinance. Detailed information on the hazards arising from this product, the precautionary steps to be taken during proper use, dealing with spillages or other exposure and ensuring correct disposal can be found in the safety data sheet.
Fluxing agent for hard soldering of copper, brass and gunmetal alloys except for light metals with an operating temperature range from 500°C to 800°C
Mix paste well before using. Apply fluxing agent to the cleaned work piece by brushing or immersion. Flux agent should also be applied to the area around the soldering point.
Weight of content | 100 g |
Colour | White |
Smell/fragrance | Odourless |
Chemical basis | Potassium tetrafluoroborate |
DIN | 29454 |
Shelf life from production | 24 Month |
pH value | 11 |
Density | 1.35 g/cm³ |
Würth Catalogue (1)
Datasheets (1)
Certificates/ Documents (0)
Last viewed
Sealing ring, copper, shape A
Hexagon nut, high profile, with clamping piece (non-metal insert) fine thread
Tap wrench DIN 1814 Performance, adjustable
Flat washer without chamfer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
Industrial hand cleaner classic
Mixer nozzle for WIT-PE 500 and WIT-VM 250 cartridges
Thread die HSS DIN EN 22568 for standard metric ISO threads
Hexagonal bolt with thread up to the head ISO 4017, steel strength class 10.9, zinc flake, silver (ZFSHL)
Connector DIN 7427 1/4 inch
Zinc-plated steel (FE) counterweights
