Wiggle wire
Wiggle wire
WGLWRE-DRSW
Register now and access more than 125,000 products
Wiggle wire enables you to pull at multiple pulling points simultaneously
Typical peak stresses do not occur which prevents sheet metal from tearing and bumps from forming.
Total length 360 mm x 50 pcs. = 18 m. Wire thickness: 2 mm
Datasheets(X)
Bend the wiggle wire slightly beforehand so that only a single curve comes into contact with the sheet metal during welding. It is advisable to weld every curve. Always weld towards the transformer earth, not the other way around.
 | |
Length | 360 mm |
Wire diameter | 2 mm |
Product weight (per item) | 12.700 g |
Last viewed
Bodywork tool universal milling drill bit
Pipe and fastening clamp Multifix
Open-end plug tool wrench
Tension spring with double eyes DIN 2097, spring steel wire, zinc-plated steel
Car sponge
Sealing ring, vulcanised fibre, shape A
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated (A2K)
Rubber washer For vacuum lifter
Screwdriver set TX 8 pieces
Strip fuse DIN 72581