Wire rope clamp DIN 741, zinc-plated steel
DIN 741 steel zinc plated
CBLCLMP-DIN741-(A2K)-D1/2-13,0
Register now and access more than 125,000 products
Due to the withdrawal without replacement of the DIN 741 wire rope clamp, it is recommended that wire rope clamp DIN EN 13411-5 is used. From M5 the cable clamp is available as DIN EN 13411-5. For this, see art. no. 052005/0520065/052008/0520010/0520013/0520016/0520019/0520022/0520026/0520030
Wire rope clamps for cable end connections with minor requirements. For safety requirements, wire rope clamps in accordance with DIN EN 13411-5 must be used.
The clamping jaw must always be attached to the loaded part of the rope. Where a thimble is used in the loop design, the first wire rope clamp should be attached directly to the thimble. The distance between the wire rope clamps should be at least one wire rope clamp t. Whereby t is the width of the clamping jaw.
 | |
Standards | DIN 741 |
Material | Steel |
Surface | Zinc plated |
Suitable for rope diameter (d) | 13.0 mm |
Grip width (t) | 18 mm |
Thread type x nominal diameter (d1) | M10 |
Height (h1) | 55 mm |
Width (b1) | 42 mm |
RoHS-compliant | Yes |
Würth Catalogue (1)
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Retaining jaw set for crimping pliers
Pipe and fastening clamp Multifix
Lock nut DIN 7967, zinc-plated steel, blue passivated (A2K)
PTFE core, stainless steel torch set
1-ear clamp with insert ring
Hexagonal bolt with shank
Round head screw with square neck
Flat connector contact Standard Power Timer(SPT) 4.8/5.8
Silicone acetate Sanitary purpose
Pipe and fastening clamp Multifix
