piasta^® wing-type drilling screw, countersunk milling head with AW drive

Name: piasta ® wing-type drilling screw, countersunk milling head with AW drive
Brand: Würth
SKU: 0215885590

Wing-piasta steel flake zinc silver cntrsnk hd AW
SCR-DBIT-WNG-CS-CUTHD-AW25-(RSI)-5,5X90
ZEBRA PIASTA

Art.-no. 0215885590

EAN 4047376279032

All versions

Specification

The self-drilling screw with up to 50% time savings when fastening wood to metal sub-structures

AW drive system:

Better mounting output thanks to fatigue-free screwing in; the required contact pressure for transmission of the torques is considerably lower

Even force distribution prevents damage to the surface-protection coating and therefore ensures better resistance to corrosion

Notice

Wing-piasta screws must be appropriately tested for usability for each application case. Only install using application tools with a depth stop and claw coupling

Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)

∅ 3.9/4.2/4.8 mm)

For use with wood and gypsum material boards and cement-bound mineral construction material boards with thin-walled steel profiles.

Instructions

How it works

The core hole is drilled into the substructure. The wings break off upon contact with the metal

The first few turns of the screw cut the thread, the remainder of the screw then screws into the thread


Nominal diameter (d)	5.5 mm
Length (l)	90 mm
Head diameter (d_k)	10.8 mm
Head height (k₁)	4.4 mm
Drill tip length (l_p)	11 mm
Other standard	Company standard
Material	Bimetal
Surface	Flake zinc silver
Head type	Countersunk milling head
Internal drive	AW25
Thread type	Self-tapping screw thread
Min. recommended substructure thickness	2.0 mm
Max. material thickness to be drilled through (metal) (l_U)	5 mm
Max. attachment thickness (l_B)	70 mm
Min./max. recommended installation speed (idling)	1200-1800 rpm
Approval	No
RoHS-compliant	Yes