Round wire snap ring and snap ring groove DIN 9925, A2 stainless steel, for shafts
DIN 9925 stainless steel A2
SNAPRG-DIN9925-A2-D6,0
Register now and access more than 125,000 products
DIN 9925 replaces DIN 7993 shape A. Dimensions and tolerances according to DIN 9925. As the stainless steel version is not regulated by standards, there are no generally valid values for the release speed of the snap rings. These may differ from the values specified in DIN 9925.
 | |
Suitable for shafts | 6 mm |
Suitable for groove diameter | 5.2 mm |
Internal diameter (d1) | 5.1 mm |
Slot width (e1) | 1 mm |
Width (b1) | 0.6 mm |
Thickness (s1) | 0.6 mm |
Standards | DIN 9925 |
Form | A |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Datasheets(X)
CAD data (available after login)
Last viewed
Shrink, planishing and finishing hammer short version
Hexagonal bolt with shank DIN 931, steel 10.9, plain
Hexagonal bolt with threading up to head
1/4-inch socket wrench insert For TX screws
Commercial vehicle low-viscosity grease
Single-use cover fleece
Thread-rolling screw
ANGLE GRINDER EWS 10-115 CLASSIC 220V
Hexagonal nut with clamping piece (all-metal) ISO 7042, steel 10, zinc-plated, blue passivated (A2K)
Pan Head screw with hexalobular head ISO 14583, steel, strength class 8.8, zinc-nickel-plated, black (ZNBHL)
