Sticker-Ex
Gel cleaner
GELCLNR-(STICKER-EX)-AEROCAN-500ML
Register now and access more than 125,000 products
The adhesive effect of the gel allows a significantly longer contact time for the solvent, resulting in improved cleaning performance compared to liquid cleaners
Prior to treatment, check rubber and plastic parts for compatibility in an invisible location. Paints may be attacked.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the wide range of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Universal application for removing grease, adhesive, paper or film labels, sealants, silicone, oil, grease, wax, tar, paraffin, printing ink, etc. Dissolves various marking inks on smooth, non-absorbent surfaces.
Spray the label and leave to take effect depending on degree of soiling. You may need to roughen laminated labels first. You can then peel off the label and remove any adhesive residue with a cloth.
Contents | 500 ml |
Colour | Colourless |
Chemical basis | Aliphatic hydrocarbon |
Smell/fragrance | Citrus |
Viscosity/consistency | Gel |
Density | 0.77 g/cm³ |
Min. flashing point | 21 °C |
Shelf life from production/conditions | 24 Month / frost-free storage area |
AOX-free | Yes |
Silicone-free | Yes |
| Compatible with most materials: | |
| Metal | + |
| Ceramic | + |
| Glass | + |
| Painted surfaces | + |
| Plastic | / |
| + = compatible; – = not compatible; / = limited compatibility | |
Last viewed
Terminal block with wire guard
Hexagonal bolt with thread up to the head DIN 933, A4 stainless steel, plain
Plastic LED torch
Hexagonal bolt with thread up to the head DIN 933, A4 stainless steel, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Disposable nitrile glove
Angle grinder, pneumatic, spare parts
Amo® III 7.5 type 2 window frame screw Cylinder head 8.0 mm
Hexagonal bolt with thread up to the head DIN 933, steel 10.9, zinc-plated, blue passivated (A2K)
Twist Drill bit HSCO DIN 338 TYPE RN