Windscreen cutting line
Windscreen cutting line
CUTLNE-WSCRN-RD-L25M
Register now and access more than 125,000 products
High-tech fibres for very high tensile force
- Extremely tear-resistant cutting thread for use in tight corners and in particularly narrow gaps
Minimal risk of paint and interior damage
- Due to its round cross section, cutting injuries are extremely rare
Reusable and flexible
- Can be used two to four times
- If the thread tears, it can be knotted to continue working
The tensile strength is specified in N in this case; for cutting wires, it is indicated in N/mm². One square cutting wire with 0.6 x 0.6 mm cross section and 2000 N/mm² corresponds to tensile strength of approx. 720 N.
Form | Roll |
Min. tensile force | 1800 N |
Length | 25 m |
Colour | Red |
Material | PE - Polyethylene |
Cord thickness | 0.85 mm |
Datasheets(X)
Last viewed
Silicone acetate Sanitary purpose
1/2 inch socket wrench insert, metric
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
Monier pliers DIN 5242
Safety goggles CEPHEUS®
Stepped tommy bar
Fixanchor W-FAZ/S
Quick-action closure for chain
Engine protective lacquer
Multiple plug housing for blade connectors 2.8 x 0.5 mm
