Wire cup brush with support ring, knotted steel with M14 connecting thread
Braided wire cup brush steel with support ring
CPBRSH-AG-KNOTTED-STEEL-D80MM
Register now and access more than 125,000 products
- Efficient machining of large surfaces with aggressive brushing effect and high wear resistance thanks to clockwise knotting on the wire cup brush
- For direct use on angle grinders
- Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.
- Caution: Use angle grinders with a minimum diameter of 180 mm or greater
- Always wear safety goggles and safety gloves when working with machine brushes!
- Removing slag, rust, scale, concrete residue
- Cleaning welded seams
- Removing varnish and paint
- Preparing metal surfaces before varnishing
 | |
Diameter (D) | 80 mm |
Usable length of wire (H) | 25 mm |
Tool holding device (d) | M14 |
Wire diameter | 0.50 mm |
Material of wire | Steel |
Design | Hardened, braided clockwise |
Aggressiveness | Middle |
Suitable for angle grinder (point system) | 4 of 4 points |
Max. rotation speed | 9000 rpm |
EN standard | 1083-2 |
Würth Catalogue (1)
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Order protector with rip-tape fastening
Angled magnet
1/2-inch impact socket wrench insert hexagon, metric, long
All weather silicone sealant for glazing
Hose pack For pressure testing valve
Hexagonal nut with flange and clamping piece (all-metal) according to MBN standard
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
3/8 inch socket wrenches Assortment of 42 pieces
Wire nail DIN 1151, steel, plain
Slotted cheese head screw assortment 1350 pieces in system case 4.4.1. DIN 84
